1:35 Sd.Kfz. 251 Wheel Set Type 2 - Continental Extra Gelände is a detailed set of front wheels for the German half-track carrier, not a model of the vehicle. The Type 2 variant is recognized by the Continental Extra Gelände marking on the sidewall.
Responsibility details are not available.
This is a detailed set of front wheels for the German Sd.Kfz. 251 half-track carrier, not a kit of the vehicle. The manufacturer gives the content as three tires and one separate wheel disc and the form as Type 2 with the Continental Extra Gelände marking. The parts are 3D printed and are supplied unpainted.
The Sd.Kfz. 251 was the standard armored half-track carrier of the German army of the Second World War. It had its tracked running gear at the rear and only a steered axle at the front, so the front wheels are the vehicle's only pneumatic wheels and are clearly visible on a model. Several domestic makers supplied tires to German equipment and the forms are told apart above all by the lettering on the sidewall.
Cut the printing supports off and clean the surfaces up; protect your airways when sanding. Glue the resin parts with cyanoacrylate glue, as ordinary cement for plastic will not join them. Wash the parts before painting and apply a primer coat - without it paint will not hold on resin. The lettering on the sidewall will stand out if you go over the rubber with a dry brush of lighter gray after the base black.
This is an accessory for a model, not a kit. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
