7.5cm PaK 40 rounds and cartridge cases, 1:35, 30 pcs — a 3D-printed resin set of thirty rounds and cartridge cases for the German PaK 40 anti-tank gun from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin set of rounds and cartridge cases for the German 75 mm PaK 40 anti-tank gun in 1:35 scale from GINGER CAT. The manufacturer gives thirty pieces in the package and distinguishes rounds from cartridge cases, so both ammunition made ready and a heap of spent cases by the carriage can be built.
The PaK 40 was the main German anti-tank gun of the second half of the war: 75 mm caliber, a long barrel and a low shield that made the weapon easy to conceal. The same ammunition was used in the tank and self-propelled forms of this weapon, so the set serves more than one subject. At an anti-tank position a heap of empty cartridge cases is moreover the most eloquent detail that can be built into a scene, because it shows how long the fight was.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
