A photo-etched anti-slip plate for vehicle models in 1:35 scale, the no. 3 pattern variant.
Responsibility details are not available.
Anti-slip plates are on real vehicles everywhere people walk and climb: on the fenders, on the engine deck, on platforms and steps. Their pattern is regular and fine, so on a model it immediately conveys the scale and gives surfaces a depth that a smooth surface will never have. The no. 3 designation distinguishes a pattern variant within the line, and other numbers carry different patterns.
A photo-etched metal part with an anti-slip pattern for models in 1:35 scale. It is used as a sheet from which you cut the shape you need yourself, so it suits vehicles for which no ready-made set exists. Before starting, compare the pattern with references for the machine you are building: the patterns differ between individual vehicles and manufacturers, and in 1:35 scale the difference shows clearly.
Separate the parts with a sharp blade on a hard surface, not by breaking them off, so that the edge does not ripple. Level and degrease the area on the model beforehand; the slightest irregularity shows through a thin part. Glue with thin super glue that flows under the part, and press the whole area down at once, for example with the flat of a pair of tweezers. Apply a primer before painting, otherwise the paint rubs off the smooth surface easily. The pattern comes out when you go over the area with a dry brush in a lighter shade once it has dried.
The model of the vehicle, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
