Mortar shells, 10 pieces, 1:35 (Ginger Cat) are ten printed resin mortar shells in 1:35 scale for ammunition and supply scenes.
Responsibility details are not available.
A set of ten printed resin mortar shells in 1:35 scale from the Turkish brand Ginger Cat. With this set the manufacturer highlights the sharp outlines, correct proportions and finely reproduced tail fins. It makes them by high-resolution resin printing. The box gives the count of ten pieces. These are accessories for a scene, not a kit; paints and glue are not included in the package.
A mortar shell is recognizable at a glance: a teardrop body and a tail stabilizer with fins. In a diorama it belongs at ammunition points, at mortar positions, on the cargo beds of supply trucks and in scenes of replenishing ammunition. The manufacturer recommends the set for mortar crews, artillery positions, armored vehicles and supply trucks, in historical and present-day settings alike.
First wash the printed resin parts in warm soapy water so that the print residue disappears from the surface and the paint will hold. Cut off the supports with a saw or a cutting disc, never with nippers, which will break the resin. The manufacturer recommends applying a base before painting. Glue the parts with cyanoacrylate glue or epoxy, as cement for plastic will not hold here. A dark wash into the recesses and a drybrush on the edges will draw out the detail. Wear a respirator while sanding.
This is an accessory to a model, not a kit. The base kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
