Tiger I 8.8 cm KwK 36 L/56 barrel, 1:35 — a 3D-printed resin accessory from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin barrel of the German 88 mm KwK 36 tank gun with a barrel length of 56 calibers, for a model of the Tiger I tank in 1:35 scale from GINGER CAT. The manufacturer gives one piece in the package. The barrel goes on in place of the plastic part and offers a circular cross-section with no mold seam and an open muzzle; the twin-baffle muzzle brake of the Tiger is the thing that catches the eye most.
The Tiger I was a German heavy tank with frontal armor that most Allied weapons could not penetrate in 1943, and with the 88 mm KwK 36 gun derived from the successful 8.8 cm anti-aircraft gun. A barrel length of 56 calibers gave the weapon a high muzzle velocity and excellent accuracy at long range. It was the combination of the two that made the Tiger a machine that forced its opponents to look for a hit from the side and from ambush.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
