TV antenna, 1:35 — a 3D-printed resin TV antenna for dioramas in 1:35 scale from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin TV antenna in 1:35 scale from GINGER CAT. The manufacturer gives one piece in the package. It is a civilian scenic accessory for the roof of a building; in the same sub-line the manufacturer also lists a satellite dish and a mobile network antenna, so a roof can be filled according to the period the scene portrays.
The roof of a house is an area in a diorama that usually stays empty, and yet it is precisely what places a scene in time. A classic TV antenna with its cross elements belongs to the second half of the twentieth century, so it moves a scene to the period when there was one in every street. At the same time it is a very thin structure that injection-molded plastic could not manage; resin printing keeps the individual elements separate and thin enough to look convincing.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
