Decal paper with a white base for laser printers from Green Stuff World. It lets you print your own decals that cover even on a dark surface.
Responsibility details are not available.
Paper for making your own decals on a laser printer, in the version with a white base. The white layer is the key difference from the clear variant: a color printed on clear paper practically disappears over a dark surface, whereas on a white base it stays legible and rich. It therefore suits insignia, numbers, lettering and unit markings on dark finishes.
Prepare the motif in a graphics program, print it on a laser printer and let it dry thoroughly. The printed sheet has to be clear coated, otherwise the print will dissolve in water; use light passes of clear coat from a spray can and let it dry between them. Cut the finished decal out as close to the motif as possible, because with white paper every extra edge is visible.
A laser printer cannot print white, so the white elements of a motif are created by leaving them unprinted. Better, then, to make the color a shade richer than it looks on the screen. Apply the decal over a gloss surface with a softener and, once dry, seal it with a matte clear coat that evens out the surface and hides the edges of the carrier film.
Intended for laser printers. The printed sheet has to be clear coated before use.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
