Williams FW09 — United States Grand Prix (Dallas) 1984 in 1:20 scale from Studio27. A multimedia kit (Full Detail Kit) for experienced modelers — a combination of resin, metal castings, photo-etched parts and rubber tires, not an ordinary plastic kit.
Responsibility details are not available.
This is a multimedia kit from the Japanese company Studio27 in 1:20 scale. It is not an injection-molded plastic model and it is not intended for beginners. Full Detail Kit means that the body and the main parts are cast in resin, the small and highly loaded parts are metal castings, the thin elements (grilles, straps, edges) are formed by photo-etched sheet, and rubber tires, clear parts and decals go with them. The parts have no plastic pins and sockets — the build is about fitting, not about snapping together.
Why do modelers reach for a set like this? Because nobody makes this particular car from this particular Grand Prix in plastic. Short-run multimedia kits are the only way to have a precisely defined racing special on the shelf — and that is exactly why they are sought after by collectors and why their availability is limited.
The Williams FW09 was the car of the 1984 season and the first Williams with a Honda turbo engine. The chassis struggled with the sudden surge of turbo power, but in Dallas it came together: the Grand Prix in Dallas was run only once in the history of Formula 1 — in 1984 — and it became famous as one of the hardest races ever held. In the Texas heat the surface of the track broke up, engines and drivers alike were cooking, and only a handful of cars reached the end of the full distance. Keke Rosberg won, in the Williams FW09 — and it was at the same time the first win for a Honda engine in Formula 1 after many years. The model therefore captures the winning car from the only Dallas Grand Prix ever run.
The most important piece of advice: wash all the parts first in warm water with detergent and a brush. Mold release agent stays on the castings — if you do not remove it, the paint will not grip and will peel once dry. That is the most common reason a resin model fails. After washing and drying, apply filler primer.
Next: resin cannot be glued with plastic cement — you need cyanoacrylate glue, ideally with an activator. Cut the casting blocks off with a saw (not with nippers — the casting cracks) and clean up the flash. Test fit, sand and fit the parts together, they do not seat by themselves. Resin dust is harmful to health — sand strictly wet and with a respirator, in a ventilated space. Photo-etched sheet is bent with an etch bender, or at least with a razor blade and tweezers. Seal the painted surface and the decals with a gloss clear coat.
The model is supplied unassembled and unpainted, as a multimedia kit. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
