LACI 1:200 Boeing 777-200/300 - extended landing flaps is a resin accessory set of wing high-lift devices for a model of the Boeing 777 airliner in 1:200 scale.
Responsibility details are not available.
This item is not a kit of an airplane but a resin accessory. It contains castings of the wing high-lift devices of the Boeing 777, which replace the original plastic parts of a kit in 1:200 scale so that the model can be built with the landing flaps extended. It is the flaps in landing configuration that turn a model of an airliner into a living scene rather than just a silhouette on a stand.
Kits of airliners in 1:200 tend to have the wing cast in one piece and the high-lift devices only suggested by engraving. The resin casting, in contrast, carries separate segments with their own profile, with a leading and a trailing edge and with the supports between flap and wing. A model of the 777 has a span of roughly thirty centimeters in this scale, so the individual parts are tiny and the sharpness of the mold decides - with resin it tends to be finer than with injection-molded plastic.
First wash the parts in warm water with detergent, so that the mold release agent is removed, because otherwise paint will not hold on them. Cut the casting blocks off with a saw or a knife and level the surface with sandpaper - when sanding resin, sand wet and protect your breathing. It is glued with cyanoacrylate glue; ordinary modeling cement for polystyrene does not dissolve resin. Apply primer before spraying. On airliners the inner surfaces of the high-lift devices are usually treated differently from the underside of the wing, so check the references for the particular aircraft.
The set is supplied unassembled and unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
