1:24 Skoda Fabia Rally2 Evo Conversion Set (Conversion From R5 To Rally2 Evo) (For IXO)

Skoda Fabia Rally2 Evo - a conversion set from the R5 to the Rally2 Evo (1:24, Mf zone)

This conversion set from the maker Mf zone makes it possible to rebuild a model of the Skoda Fabia R5 into the newer Rally2 Evo version in 1:24 scale. The parts are made of resin, or rather by 3D printing, and replace the body items that distinguish the two versions. It is not a complete model of a car but a conversion accessory to an existing kit.

What the conversion changes

The Skoda Fabia Rally2 Evo is an update of the original R5 car and differs above all in the treatment of the front and the rear end. The set typically holds the front and rear bumper, the grille and inserts, possibly light covers as well, so that the model matches the current Rally2 Evo competition specification. The exact content keeps to the items by which the Evo differs from the R5.

Tips for working it

• Separate the parts from the casting blocks and clean the mating surfaces up carefully with respiratory protection.
• Wash the mold release agent off and degrease them, and dry-fit the parts against the body.
• Bond them with super glue (cyanoacrylate), fill the gaps with putty and sand them over.
• Even the transitions out with a primer before the paint goes on.

Who the set is for

• Builders who want to build the Rally2 Evo version from an existing Fabia R5 in 1:24 scale.
• More advanced modelers used to resin conversions and to filling.
• Collectors of current competition Skodas.

This is a conversion accessory, not a complete model. The base kit, glue and paints are not included in the package.