The MHU-83 lifting munitions truck in 1:32 scale comes from 3D printing and shows the machine with the loading platform raised.
Responsibility details are not available.
This kit comes about through 3D printing technology and is intended for advanced builders. It captures the ground truck for handling aircraft armament at the moment when it has the platform run out upward, that is at the moment of the actual hanging of the load under the wing or the fuselage of an aircraft.
No modern combat airfield can do without this machine. It lifts a heavy bomb or rocket to a precise height and holds it motionless until the armorers secure it on the pylon. The raised position is more rewarding for dioramas than the folded one, because it clearly shows the story and creates a vertical break in an otherwise low scene under the aircraft.
First free the parts of the remains of the print supports and sand the areas left by them smooth; protect your airways while sanding. Try the assembly of the lifting mechanism dry, so that the platform holds the intended angle. Glue in small amounts with a fast-setting glue and prop the finished assembly up while it hardens. Apply the primer coat in a thin layer, so that the engraved detail is not lost. The hydraulic parts come into their own if they are left smooth and lightly glossy against the body.
The parts are supplied unassembled and without a coat; obtain paints and glue separately.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
