1:72 F-4EJ KAI

1:72 F-4EJ KAI "PHANTOM II" INTERIOR 3D DECALS FOR HASEGAWA KI

16.36 €
Add to Cart

1:72 F-4EJ KAI "PHANTOM II" INTERIOR 3D DECALS FOR HASEGAWA KI

Colored 3D elements for the crew compartment of an F-4EJ Kai Phantom II model in 1:72 scale, according to the name intended for the Hasegawa kit.

Scale1:72
Manufacturer Kelik
Product EAN8591111901276

Responsibility details are not available.

16.36 €
13.52 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The F-4EJ Kai is the Japanese form of the Phantom II fighter. The basis was the F-4E version built under license for the Japan Air Self-Defense Force (JASDF), and the Kai designation belongs to a later upgrade with new cockpit equipment and avionics. It is the cockpit that is most visible on a model, especially on a two-seat machine with extensive glazing: in 1:72 scale the instrument panels and side panels make up an area the size of a fingernail, on which every detail nonetheless shows.

What the set offers

The set brings colored three-dimensional elements for the crew compartment, that is finished colored areas with three-dimensional relief that replace the lengthy hand painting of tiny dials and switches. According to the name it is built for a kit from Hasegawa, and on the moldings of other makers the shapes may fit differently. Exactly what the sheet contains and where each element belongs are given in the enclosed manufacturer's instructions.

How to apply the elements

Before applying them, check in the instructions whether the elements are self-adhesive. The method of application differs between ranges, so do not start with water until you have checked it in the manufacturer's instructions. First wash and degrease the area the element is going onto and let it dry thoroughly. Transfer the element with tweezers or a toothpick with a drop of water on the tip, lay it down and press it with a soft stick from the center toward the edges. Fit them before closing up the fuselage, as afterwards you cannot reach the place.

  • colored 3D elements for the crew compartment
  • 1:72 scale, the subject is the F-4EJ Kai Phantom II
  • according to the name, intended for the Hasegawa kit
  • three-dimensional relief replaces hand painting of dials
  • check the method of application in the manufacturer's instructions

Terms of supply

This is an accessory to a kit. The kit itself, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Check that in the manufacturer's instructions. The method of application differs between ranges, so do not start with water without support in the instructions.

The name states a kit from Hasegawa. On the moldings of other makers the shapes may fit differently.

It is not. This is an accessory to a kit, which you obtain separately.

Before closing up the fuselage, onto a washed and degreased area. Once the fuselage halves are glued together you cannot reach the cockpit.

Last seen

KelikRSK72-00321:72

1:72 F-4EJ KAI "PHANTOM II" INTERIOR 3D DECALS FOR HASEGAWA KI

Colored 3D elements for the crew compartment of an F-4EJ Kai Phantom II model in 1:72 scale, according to the name intended for the Hasegawa kit.
In stock
16.36 €
Quinta StudioQD481901:48

1:48 Tempest Mk.II 3D-Printed & coloured Interior on decal paper (Eduard)

Color printed cockpit elements for the British Hawker Tempest Mk.II fighter in 1:48 scale, prepared for the Eduard kit. The part is dipped briefly in lukewarm water and slid off the backing paper.
In stock
13.56 €
SpalahSP147721:72

1:72 Scale model "Аnti-tank gun MT-12 "Rapira" 100mm"

An all-resin model of the 100 mm MT-12 Rapira anti-tank gun in 1:72 scale from the Ukrainian brand Spalah.
In stock
23.96 €
RevellRE39695

Revell - Maskovací páska 10mm (délka 10m)

Revell masking tape, 10 mm wide, 10 m on the roll - a narrower modeling tape that follows curves and smaller parts well. A modeling supply, not a kit.
In stock
3.16 €
AberABRA720091:72

1:72 B wing (2 variant) armament for British fighterSpitfire Mk.I to V

Aber B type wing armament for the Spitfire Mk.I to V in 1:72 scale is a set of metal barrels, the second variant of the execution. It is not a kit.
In stock
5.56 €
Master BoxMB240071:24

1:24 WORLD OF FANTASY Graggeron & Halseya

Master Box World of Fantasy: Graggeron and Halseya (1:24) is a plastic fantasy set of a female warrior and a lizard creature to be assembled and painted.
In stock
16.36 €
ReskitRS72-05001:72

1:72 Pivot pylons for F-111 (A,D,E) with LAU-105 (4 pcs)

Pivot pylons for the F-111 (A, D, E) with LAU-105 (4 pcs) is a resin 3D-printed set of external pylons with a twin rocket rail for models of the combat aircraft with a variable-geometry wing in 1:72 scale.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.