36.0mm Disc Saw Fine

Voyager 36 mm disc saw - fine teeth

A thin photo-etched circular saw blade from Voyager Model, 36 mm in diameter, with fine teeth. It serves for precise cutting of modeling parts: plastic, resin, thin metal and profiles. Thanks to the small thickness of the blade the kerf is narrow and there is minimal waste. The blade is held in an ordinary modeling handle (a knife handle).

Use

• A diameter of 36 mm - a larger diameter allows a deeper cut and a longer stroke
• Fine teeth: a clean and fine cut with the narrowest kerf, suited to thin parts, fine profiles and accurate work
• Suited to thin plastic and resin parts, fine profiles and accurate kerfs
• A narrow kerf and minimal loss of material

Who it is for

For modelers who need to separate parts accurately, shorten a profile or make a clean kerf where an ordinary saw would be too coarse. The blade is intended for a knife handle and suits building and modifying plastic and resin kits as well as working with accessory sets. Choose the diameter according to the depth of cut and the coarseness of the teeth according to the material and the cleanness of cut you want; that way you can prepare a set of blades for different jobs for one handle. A circular blade holds the cut in one plane better than a straight saw, which helps with longer and more accurate kerfs.

The teeth are sharp: work carefully, guide the cut with light pressure and store the blade so that the teeth do not get damaged. Protect your airways when sanding resin.