Modelling Supplies

3DKolis3DK-DIP

Držák izolepa,pásky

A holder for adhesive tape and rolls of tape for the modeling bench. It keeps the rolls in one place, so they do not roll about the bench and stay to hand.

In stock

1.56 €

3DKolis3DK-DRN

Držák do ruky s nástavbou

A rendition of the hand-held handle completed with an extension. It widens the reach to pieces that would clamp onto a bare holder only with difficulty, and still stays light in the palm.

In stock

5.96 €

3DKolis3DK-DR

Držák do ruky Airbrush

A handle for working with an airbrush. The part is clamped onto the holder and the hand then stays out of the path of the paint, so the surface is not handled and the coat dries without fingerprints.

In stock

3.56 €

3DKolis3DK-FLEXV

Flexi držák do ruky

3DKolis Flexi hand-held holder is a flexible 3D-printed aid for holding small parts of a model while they are painted and worked on.

In stock

1.96 €

3DKolis3DK-SD

Sada držáku brusného papíru

3DKolis Sanding Paper Holder Set is a 3D-printed aid for clamping sandpaper and sanding model parts precisely and comfortably.

In stock

20.36 €

3DKolis3DK-DDR

Držák do ruky-brousítko

A hand-held aid for sanding small parts. It fits in the palm, holds firmly and guides the hand more steadily than bare fingers when edges are cleaned up.

In stock

4.36 €

3DKolis3DK-MNS-M

Svěrák větší

A modeling vise that clamps to the bench, with a joint for tilting and a jaw opening of 48 mm.

In stock

9.16 €

3DKolis3DK-MNS-S

Svěrák menší

The smaller size of a modeling vise from a Czech range of workbench aids.

In stock

9.16 €

3DKolis3DK-MNS-K

Svěrák kulatý

A round modeling vise for holding small parts during gluing, sanding and painting.

In stock

9.16 €

3DKolis3DK-SLOR

Otočná ramena 90° letadla

3DKolis 90° swivel arms for aircraft are a 3D-printed aid which holds an aircraft model at a right angle and makes both painting and assembly easier.

In stock

6.36 €

-25 %Stock Clearance

BandaiBAN67431

PMX-002 BOLINOAK-SAMMAHN

A plastic model of the PMX-002 Bolinoak Sammahn mobile suit, one of the prototypes of the PMX line from the Zeta Gundam setting.

Last one!

~~47.96 €~~35.96 € You save 12 €

1:72 YOKOTA AIRBASE Type 2 - Acrylic 3 mm (240 x 240 mm) (190g)

-20 %

KelikKS721131:72

1:72 YOKOTA AIRBASE Type 2 - Acrylic 3 mm (240 x 240 mm) (190g)

Kelik Yokota Airbase Type 2 - display base is an acrylic base with the motif of an air base for presenting aircraft models.

In stock

~~23.16 €~~18.53 € You save 4.63 €

1:72 YOKOTA AIRBASE Type 1 - Acrylic 3 mm (180 x 357 mm) (210 g)

-20 %

KelikKS721121:72

1:72 YOKOTA AIRBASE Type 1 - Acrylic 3 mm (180 x 357 mm) (210 g)

An elongated acrylic board 180 by 357 millimeters and 3 millimeters thick, weighing roughly 210 grams. The print represents the hard surface of a Japanese air base, the type 1 rendering.

In stock

~~25.96 €~~20.77 € You save 5.19 €

1:72 IJN Hiryu 1941 - Acrylic 3 mm (410 x 270 mm) (410 g)

-20 %

KelikKS721111:72

1:72 IJN Hiryu 1941 - Acrylic 3 mm (410 x 270 mm) (410 g)

A large-format acrylic board 410 by 270 millimeters, 3 millimeters thick, weighing around 410 grams. It carries the motif of the flight deck of a Japanese aircraft carrier in its 1941 state.

In stock

~~41.56 €~~33.25 € You save 8.31 €

1:72 French frigate D-655 Bretagne - Acrylic 3 mm (240 x 240 mm) (190g)

-20 %

KelikKS721101:72

1:72 French frigate D-655 Bretagne - Acrylic 3 mm (240 x 240 mm) (190g)

A printed acrylic base 240 by 240 millimeters in size and 3 millimeters thick, weighing approximately 190 grams. It depicts the deck of a modern French frigate in 1:72 scale.

In stock

~~23.16 €~~18.53 € You save 4.63 €

1:72 SSoviet Square Concrete Plates Airfield 1970 th - Base - Acrylic 3 mm (280 x 180 mm) (170 g)

-20 %

KelikKS721091:72

1:72 SSoviet Square Concrete Plates Airfield 1970 th - Base - Acrylic 3 mm (280 x 180 mm) (170 g)

A printed display base for models with a motif of the square concrete slabs of a Soviet airfield apron. An acrylic sheet 3 mm thick measuring 280x180 mm, 1:72 scale.

In stock

~~17.16 €~~13.73 € You save 3.43 €

1:72 French frigate D-650 Aquitaine 2017 - Base - Acrylic 3 mm (280 x 180 mm) (170 g)

-20 %

KelikKS721081:72

1:72 French frigate D-650 Aquitaine 2017 - Base - Acrylic 3 mm (280 x 180 mm) (170 g)

Kelik French frigate D-650 Aquitaine - display base is a themed acrylic base for presenting a finished model to effect.

In stock

~~18.76 €~~15.01 € You save 3.75 €

AMMO of Mig JimenezA.MIG-2062

A.MIG-2062Cleaner (500ml)

A cleaning product for painting work, in a 500 ml bottle.

In stock

19.96 €

AMMO of Mig JimenezIONIC-0152

IONIC Leather Brown

AMMO IONIC Leather Brown is a water-thinnable acrylic paint from the line for figures and miniatures, in a brown leather shade with a matte finish.

In stock

3.56 €

AMMO of Mig JimenezIONIC-0130

IONIC Laser Green

AMMO IONIC Laser Green is a water-thinnable acrylic paint from a range developed for painting figures and miniatures, with a bright green shade and a flat finish.

In stock

3.56 €

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.