3.7cm Flak 18 ammunition boxes, 1:35, 8 pcs — a 3D-printed resin set of eight ammunition boxes for the German 37 mm Flak 18 anti-aircraft gun from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin set of ammunition boxes for the German 37 mm Flak 18 anti-aircraft gun in 1:35 scale from GINGER CAT. The manufacturer gives eight pieces in the package. The boxes belong to a firing position and can be placed open or closed, stacked or strewn about.
The Flak 18 was the first German 37 mm anti-aircraft weapon built in large series, introduced before the war. It had a heavy carriage and a lower rate of fire than the later versions, yet even then it used up a considerable quantity of ammunition in action, so the crew had boxes of rounds ready at the gun. Eight boxes make it possible to play out a whole scene: some stacked in a trench, some open at the gun, some set aside.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
