Panzer I tracks, 1:35 — a 3D-printed resin accessory from GINGER CAT.
Responsibility details are not available.
3D-printed resin tracks for a model of the German Panzer I light tank in 1:35 scale from GINGER CAT. They replace the tracks from the kit, which tend to be of flexible plastic or to have a mold seam. Printed resin allows fine detail on the links and open gaps, which on an injection-molded part are usually filled in.
The Panzer I was a German light tank of the first half of the 1930s, originally intended mainly for training. It had only machine gun armament in a two-man turret and very thin armor, yet the Wehrmacht went into Spain, into Poland and into France with it, because at first it had nothing better. The later Ausf. B version received a longer hull and five road wheels; the narrow tracks were always clearly visible on a model, because no side skirts cover them.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
