Panzer III and IV winter tracks 1:35 (Ginger Cat) are printed resin wider winter tracks for models of the German Panzer III and IV tanks in 1:35 scale.
Responsibility details are not available.
A set of printed resin winter tracks for models of the German Panzer III and Panzer IV tanks in 1:35 scale from the Turkish brand Ginger Cat. With this set the manufacturer highlights the wider winter track, individual links with the guide horn reproduced and a resin print suitable for painting and weathering. This is an accessory to a kit, not a model of the vehicle.
German tanks on the Eastern Front ran into a problem the western campaign had not shown: in deep snow and in churned-up ground the narrow tracks cut in and the machine came to a halt. The answer was wider winter tracks, which spread the weight over a larger area. On a model the difference is clearly visible, because the wider track stands out beyond the line of the fender, and the set therefore suits scenes from the winter period above all.
Wash printed resin tracks in warm soapy water before gluing so that the paint will hold, and cut off the supports with a saw or a cutting disc. Glue the links with cyanoacrylate glue a few at a time into longer runs, and leave the finished track hanging in the correct sag until the glue has set. The best approach is to paint the tracks off the model: a dark base, then a metallic shade with a drybrush on the edges and finally dust pigments from below. Wear a respirator while sanding.
This is an accessory to a model, not a kit. The base kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
