A texture roller with a handle, cobblestones from Green Stuff World. It presses a regular pavement into soft putty in a single pass.
Responsibility details are not available.
A roller with an engraved cobblestone pattern, fitted with a handle. The pattern is pressed into soft modeling putty in a single pass, so that a shapeless surface turns into a cobbled street within a few seconds. Carving the individual setts by hand is hours of work and the result tends to be irregular; the roller solves that problem in one go.
According to its designation the pattern is intended for scales roughly between 1:87 and 1:72 and the size of the element corresponds to fifteen millimeters. The roller is run over a rolled-out layer of putty, for example epoxy modeling putty or clay. You then let the finished sheet cure, cut it to shape and set it into a diorama. The pattern can also be pressed straight into the base of a scene.
Moisten the roller and the putty lightly before pressing, or coat them with a release agent, otherwise the putty will stick. Keep the pressure even and run the roller in one direction. If you are joining surfaces, always start from a finished edge and match the pattern exactly. Clean the roller with a brush pen after work, before the remains of the putty harden.
This is a tool; modeling putty is not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
