A set of 3D-printed crowbars, that is the vehicle tools of German equipment of the Second World War.
Responsibility details are not available.
On a vehicle the crowbar was a universal helper: it lifted a frozen hatch, it helped with tensioning a track, it did service in a recovery. It was carried clamped in brackets on the fender or on the armored wall alongside the rest of the tools, and it tends to be clearly visible, because it lies on the outer surface of the vehicle. It is by the stowage of the tools that a carefully built model is recognized at first glance.
The set brings 3D-printed crowbars intended to complete models of military vehicles. A long slender shape belongs among the parts that a kit usually manages only roughly, whereas printing holds a straight bar with a thin bent end. How many pieces are in the box is not stated by the name; you will find that in the manufacturer's description.
The parts are held on print supports. Separate them with a sharp blade a little away from the part and level the rest with fine sandpaper; with long thin parts, support the place of the cut so that the bar does not bend. Before painting, wash the surface, degrease it and go over it with a primer. For gluing, reach for cyanoacrylate glue (super glue), as cement for polystyrene will not serve here. Finally bring out the worn end of the crowbar with a dry brush so that it looks used.
The set is for modelers of military vehicles who are finishing off the external details of a vehicle, and for builders of dioramas where the tools lie loose beside the machine being repaired. The box holds printed parts only; the model, paints and glue are not supplied with them, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
