Reskit 1:32 TER-9/A MOD Triple Ejector Rack for F-16 is two triple ejector racks made by 3D printing. An accessory for an F-16 model in 1:32 scale, not a model in its own right.
Responsibility details are not available.
This is an accessory set, not a model of the aircraft. According to the name it contains two pieces of the TER-9/A MOD rack in 1:32 scale and it is made by 3D printing. A triple ejector rack is hung under a pylon and carries three stores on it, typically bombs or practice munitions.
The TER-9/A is an American triple ejector rack used on tactical aircraft including the F-16. The MOD designation refers to a revised form. On the real machine the rack is a fairly intricate part with a lengthwise beam, side arms and a number of small locks and connectors, and it is precisely this detail that tends to be heavily simplified in the plastic from the box. In the large 1:32 scale the difference between a simplified and a faithful rack is clearly apparent on a finished model.
Handle 3D printed parts the same way as cast resin. First wash them in lukewarm soapy water, so that no residue from manufacture is left on the surface. Cut the print supports off with a sharp scalpel, a saw or a cutting disc and sand the surfaces down; sand wet and with respiratory protection, as resin dust must not be inhaled. They are glued with cyanoacrylate glue, that is with super glue. A primer is especially useful with 3D printing, because it evens out the surface and shows up any traces of layering. Try the assembly dry, so that the position of the stores on the pylon is right.
The set is supplied unassembled and unpainted. Glue, paints, munitions and the kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
