1:72 R-27EP (AA-10 Alamo-F) missiles (4 pcs)

1:72 R-27EP (AA-10 Alamo-F), 4 pieces: a resin set of guided missiles by Reskit for models of Soviet and Russian fighters in 1:72 scale.

Scale1:72
Manufacturer Reskit
Product EAN8591111266512

Responsibility details are not available.

10.76 €
8.89 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

R-27EP guided missiles in 1:72 scale (Reskit, 4 pieces)

The set contains four resin R-27EP missiles in 1:72 scale. It is not an aircraft model but an armament accessory with which you replace the coarser plastic missiles from the box or add stores the kit does not contain. The resin castings have crisper edges, a cleaner surface and more finely rendered control surfaces and fins than ordinary injection-molded plastic, which shows clearly in a small scale.

The real subject

The R-27 is a family of Soviet medium-range air-to-air guided missiles of modular build: the individual versions differ in the type of seeker head and in the length of the rocket motor. The letter E in the designation points to the version with the longer motor and greater range, while the P version carries a passive radar seeker head that homes on the source of emissions. Under the NATO code this variant is listed as Alamo-F. Missiles of the R-27 family were carried by frontline fighters of Soviet and Russian design.

Building and painting tips

First wash the parts in lukewarm water with detergent to remove the remains of the mold release agent, otherwise the paint holds poorly. Cut the casting blocks off with a fine-toothed saw rather than with sprue cutters, as resin is brittle. Sanding should be done wet and with respiratory protection. Glue with cyanoacrylate glue (super glue), as cement for plastic does not react with resin. Lay down a primer before painting; the missile bodies are usually sprayed a light shade and the nose sections are picked out differently. Finally a fine wash brings out the engraved lines and an even flat clear coat unifies the whole.

Who the set is for

  • builders of Soviet and Russian fighters in 1:72 scale
  • modelers unhappy with the soft rendering of the missiles from the kit
  • anyone after an accurate stores configuration
  • more experienced modelers used to working with resin and super glue

The set is supplied unassembled and unpainted, as a resin accessory. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Four resin missiles in 1:72 scale.

The P version has a passive radar seeker head that homes on the source of emissions. The R and ER versions use semi-active radar guidance. In both cases the letter E marks the longer motor and the greater range.

With cyanoacrylate glue, that is, super glue. Ordinary cement for plastic does not bite into resin and the joint would not hold.

Yes, it is worth doing. Castings tend to carry remains of the mold release agent and the paint would hold poorly on them. Lukewarm water with detergent and a soft brush are enough.

Last seen

ReskitRS72-05771:72

1:72 R-27EP (AA-10 Alamo-F) missiles (4 pcs)

1:72 R-27EP (AA-10 Alamo-F), 4 pieces : a resin set of guided missiles by Reskit for models of Soviet and Russian fighters in 1:72 scale.
In stock
10.76 €
ReskitAV35-00131:35

1:35 Merkava Mk.4 MG set, V.3 (2 pcs) + Machine gun mounts (2 pcs) for Meng kit

Two machine guns in the V.3 version and two mounts for the Israeli Merkava Mk.4 tank in 1:35 scale, intended for the kit from Meng.
In stock
31.96 €
EduardED64811791:48

1:48 Fw-190 A-8 / R-2 - Undercarriage Legs (3D-Printed) for Eduard

Fw 190A-8 / R2: landing gear legs (3D print) is a detail accessory from the brand Eduard in 1:48 scale. It is not an airplane model but a set of printed landing gear parts that replaces the plastic parts from the kit.
In stock
9 €
ReskitRSU48-02271:48

1:48 F-35B Lightning II cockpit (Detailed edition) for Tamiya kit

A well-worked resin cockpit for the F-35B Lightning II in 1:48 scale with separately cast elements, made for the Tamiya kit.
In stock
36.36 €
PanzerkraftELPA350191:35

1:35 Feststellstift for Panzer IV F - J, for 10 vehicles

The photo-etched Feststellstift accessory for the Panzer IV Ausf. F to J in 1:35 scale from Panzerkraft. It is a fine detail of the gun barrel travel lock, and the set is enough for 10 vehicles.
In stock
6.36 €
ICMICM481611:48

1:48 Mustang P-51 A WWII US Air Forces fighter

Mustang P-51 A WWII US Air Forces fighter 1:48 is a plastic kit of the early version of the American Mustang with the Allison engine from ICM.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.