The Wall - Special High Density Foam (350 x 250 x 3 mm)

The Wall - Special High Density Foam (350 x 250 x 3 mm)

8.36 €
Add to Cart

The Wall - Special High Density Foam (350 x 250 x 3 mm)

A board of dense foam measuring 350 x 250 mm and 3 mm thick, a material for building walls, surfaces and terrain on dioramas.

Manufacturer Titans Hobby
Product EAN9991117364269

Responsibility details are not available.

8.36 €
6.91 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

What kind of material it is

A board of high-density foam measuring 350 x 250 mm and 3 mm thick. It belongs among materials for dioramas, that is among items from which you make the structure, the terrain or the base yourself. The name of the line refers to a wall, which matches what dense foam is most often used for: surfaces into which the structure of masonry, render or paving is scribed.

How to work with the board

Dense foam can be cut with a sharp knife along a ruler and the surface is scribed into it with a blunt point or a graver. Cut in several light passes rather than one heavy one, otherwise the edge will buckle. Set out the joints in pencil first and only then press them in, because you are taking material away from the foam and cannot put it back. A thickness of 3 mm is the thinner of the two thicknesses offered and suits cladding over existing walls, paving, sidewalks and thin partitions. Reach for the thicker 4 mm variant where a wall is to be self-supporting or where you want deeper relief.

Painting and glue

Not every glue and not every thinner gets on with foam; some attack or shrink it. Test both on an offcut: apply a drop of glue and a little paint, let them dry and only then work on the structure itself. Before painting, the surface is usually sealed with a unifying coat on which the paint holds evenly.

Who it is for

For builders of dioramas and display scenes in any scale and for anyone who wants to make a wall or terrain to measure instead of hunting for a ready-made part.

The model, figures, paints, glue and tools are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For building walls, cladding, paving and diorama terrain. You cut out the shape and scribe the structure of masonry or render into the surface.

Only the thickness. The thinner 3 mm board suits cladding and paving, the thicker 4 mm one self-supporting walls and deeper relief.

Test both glue and paint on an offcut. Some thinners attack foam, which is why the surface is usually sealed with a unifying coat before painting.

It is not. You set out the spacing of the joints and the structure yourself according to the scale of the scene you are building.

Last seen

Titans HobbyTTH329

The Wall - Special High Density Foam (350 x 250 x 3 mm)

A board of dense foam measuring 350 x 250 mm and 3 mm thick, a material for building walls, surfaces and terrain on dioramas.
In stock
8.36 €
CMKF483541:48

1:48 Ox Towing Me 163B with a Luftwaffe Ground Crew

An ox towing an Me 163B with Luftwaffe ground personnel is a resin set in 1:48 scale from CMK for a striking aviation diorama.
In stock
23.96 €
CMKF720471:72

1:72 Soviet Pilots (2 fig.) And Mechanic WW II

Soviet Pilots and Mechanic 1:72 (CMK) - figure set is a set of three resin figures in 1:72 scale from CMK: two pilots and a mechanic of the Soviet Air Force of the Second World War.
In stock
10.76 €
CMKF722501:72

1:72 U-boat U-IX - Crew with Raincoats (3 figures)

U-boat U-IX – crew in raincoats (3 figures, 1:72) is a resin set of three submariner figures in waterproof raincoats for a model of a Type IX submarine.
In stock
10.76 €
CMKF721271:72

1:72 U-VII crew at rest part II (3 fig.)

1:72 U-VII crew at rest part II (3 fig.) is a set of three resin figures of a resting Type VII submarine crew in 1:72 scale, the second connected part.
In stock
10.76 €
CMKF482781:48

1:48 RAAF WWII Pilot (Pacific 1944/45)

RAAF pilot from the Pacific 1944/45 is a resin figure in 1:48 scale from CMK for bringing an aircraft model or a diorama to life.
In stock
10.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.