Model Building Tools, Cements and Fillers

-20 %

AK interactiveAK9559

ESSENTIAL MODELING TOOLS

AK Interactive Essential Modeling Tools is a basic set of modeling tools made up of several types of implement for building plastic models.

In stock

~~23.16 €~~18.53 € You save 4.63 €

-20 %

AK interactiveAK9556

CORRUGATION TOOL

AK Interactive Corrugation Tool is a roller tool for making corrugated sheet from thin metal foil for dioramas and sceneries.

In stock

~~9.16 €~~7.33 € You save 1.83 €

-20 %

AK interactiveAK9536

PRECISION MODEL SAW

AK Precision Model Saw is a precision modeling saw with a very thin blade and an aluminum handle. It is used for clean cutting of parts, and for cutting grooves and seams with minimal material loss.

In stock

~~10.36 €~~8.29 € You save 2.07 €

TamiyaTA87236

Extra Thin Cement (Low Odor)

Tamiya Extra Thin Cement (Low Odor) is a very thin capillary cement for plastic models with a reduced odor. It seeps into the seam and welds the joint from the inside.

In stock

5.56 €

3DKolis3DK-DRN

Držák do ruky s nástavbou

A rendition of the hand-held handle completed with an extension. It widens the reach to pieces that would clamp onto a bare holder only with difficulty, and still stays light in the palm.

In stock

5.96 €

3DKolis3DK-DR

Držák do ruky Airbrush

A handle for working with an airbrush. The part is clamped onto the holder and the hand then stays out of the path of the paint, so the surface is not handled and the coat dries without fingerprints.

In stock

3.56 €

3DKolis3DK-FLEXV

Flexi držák do ruky

3DKolis Flexi hand-held holder is a flexible 3D-printed aid for holding small parts of a model while they are painted and worked on.

In stock

1.96 €

3DKolis3DK-SD

Sada držáku brusného papíru

3DKolis Sanding Paper Holder Set is a 3D-printed aid for clamping sandpaper and sanding model parts precisely and comfortably.

In stock

20.36 €

3DKolis3DK-DDR

Držák do ruky-brousítko

A hand-held aid for sanding small parts. It fits in the palm, holds firmly and guides the hand more steadily than bare fingers when edges are cleaned up.

In stock

4.36 €

3DKolis3DK-MNS-M

Svěrák větší

A modeling vise that clamps to the bench, with a joint for tilting and a jaw opening of 48 mm.

In stock

9.16 €

3DKolis3DK-MNS-S

Svěrák menší

The smaller size of a modeling vise from a Czech range of workbench aids.

In stock

9.16 €

3DKolis3DK-MNS-K

Svěrák kulatý

A round modeling vise for holding small parts during gluing, sanding and painting.

In stock

9.16 €

3DKolis3DK-SVK

Stojan věže, kabiny

A printed stand for turrets, cabs and other separated parts of a model. A round base, two pins with a spread of ten or fifteen centimeters, and tilting as well as rotation of the part held.

In stock

15.96 €

3DKolis3DK-SLOR

Otočná ramena 90° letadla

3DKolis 90° swivel arms for aircraft are a 3D-printed aid which holds an aircraft model at a right angle and makes both painting and assembly easier.

In stock

6.36 €

-25 %Stock Clearance

AMMO of Mig JimenezIONIC-0900

IONIC Cement Gel (20ml)

A gel modeling cement from the IONIC line in a 20 ml package, suitable where a liquid cement would run.

3 leftof 12

~~8.76 €~~6.56 € You save 2.20 €

Fine ArtFA-565

Glue Dispenser Stick

Glue Dispenser Stick is an applicator tool for the precise dosing of glue. Its fine tip lets you place a tiny drop exactly where it belongs, with no overflow.

In stock

3.16 €

Fine ArtFA-525

Drill Bits 0,6 mm - 2,0 mm

Fine Art Drill Bits 0.6-2.0 mm is a set of modeling micro drill bits for the accurate drilling of fine holes in plastic, resin and soft metals.

In stock

5.16 €

TamiyaTA74167

Replacement Jaw Grips For Non-Stratch Long Nose Pliers II (2 Sets)

NOTE - these are not pliers. These are Tamiya replacement non-scratch jaw grips for the Non-Scratch Long Nose Pliers II , 2 sets in the package. The pliers themselves are not included and you have to own them already.

In stock

3.56 €

U-STARUA97001

Angle Cutter

U-STAR Angle Cutter is a modeling nipper with an angled head for comfortable separation of parts from sprues and a clean cut.

In stock

11.56 €

U-STARUA97000

Rod Punch Positioner

The U-STAR Rod Punch Positioner is a precision aid for finding and marking the center on round rods and tubes before drilling or punching.

In stock

17.56 €

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.