3.7 cm Flak 43 muzzle brakes, 1:35, 2 pcs — a 3D-printed resin accessory from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin accessory for models in 1:35 scale from GINGER CAT: a pair of muzzle brakes for the German 37 mm Flak 43 anti-aircraft gun. The manufacturer gives two pieces in the package. The accessory replaces the injection-molded plastic part, on which the muzzle and the internal openings tend to be blanked off; printed resin allows thin walls and an open muzzle.
The Flak 43 was a German automatic 37 mm anti-aircraft gun that replaced the older Flak 36 in the second half of the war. It had a faster rate of fire and a simplified design for wartime production. The weapon appeared on a towed carriage as well as on self-propelled carriers, the best known of which was the Ostwind anti-aircraft tank, so the accessory suits a model of the gun itself as well as an armored carrier.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
