1:48 Su-25 3D-Printed & coloured Interior on decal paper (Zvezda)

1:48 Su-25 3D-Printed & coloured Interior on decal paper (Zvezda)

26.76 €
Add to Cart

1:48 Su-25 3D-Printed & coloured Interior on decal paper (Zvezda)

A colored three-dimensional cockpit interior for the model of the Su-25 attack aircraft in 1:48 scale, prepared for the kit from Zvezda. The parts are dipped briefly in lukewarm water.

Scale1:48
Manufacturer Quinta Studio
Product EAN8591111000004

Responsibility details are not available.

26.76 €
22.12 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Su-25 is a Soviet single-seat attack aircraft meant for close support of ground units. It operates low over the battlefield and for that reason received an armored cockpit that protects the pilot from fire from below. The pilot's station is therefore tight and clearly laid out, so on a model with an open canopy both the instrument panel and the side panels are clearly visible.

What is on the sheet

The sheet carries three-dimensional colored parts of the interior equipment printed on decal paper. The parts have real thickness, so once applied the instrument panel, the side panels and the seat belts look three-dimensional rather than printed. The shades, the dials and the labels are printed in production.

  • 1:48 scale, manufacturer Quinta Studio, the manufacturer's part number QD48249
  • prepared for the kit from Zvezda
  • three-dimensional parts with pre-printed colors and labels
  • a brief dip in lukewarm water, with no decal softener
  • an accessory for a plastic kit

Application procedure

The part is cut out close to the outline, dipped in lukewarm water for about fifteen seconds and slid off the backing paper onto a smooth, degreased and previously painted surface. It has no adhesive layer of its own, holds most reliably on a gloss varnish, and on a busy surface a drop of cyanoacrylate glue helps. Do not use a decal softener or a setting solution. Sand down any raised plastic details in the places where the parts are meant to seat. Paint the cockpit walls before you settle the parts, because afterwards they are harder to reach. Guide the parts with tweezers and press them down with a soft tool so that the printing is not rubbed off.

Who the set is useful for

The set suits modelers building the Su-25 from Zvezda who want a cockpit at the level of detail sets without assembling photo-etch. The kit, paints and glue are not in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is prepared for the kit of the Su-25 aircraft in 1:48 scale from Zvezda.

Yes, briefly. The part is immersed in lukewarm water for about fifteen seconds and slid off the backing paper into place. A decal softener is not used, as the part holds on a gloss varnish.

A sheet of three-dimensional colored parts of the cockpit interior. The kit, paints and glue are not part of the delivery.

No. The shades and the instrument labels are printed in production. It is worth painting the surrounding cockpit walls, and doing so before the parts are applied.

Last seen

Quinta StudioQD482491:48

1:48 Su-25 3D-Printed & coloured Interior on decal paper (Zvezda)

A colored three-dimensional cockpit interior for the model of the Su-25 attack aircraft in 1:48 scale, prepared for the kit from Zvezda. The parts are dipped briefly in lukewarm water.
In stock
26.76 €
Red Fox StudioRFSDB-480061:48

1:48 Modern NATO Airfield Type 7 380x320mm (Universal)

The Red Fox Studio 1:48 Modern NATO Airfield Type 7, 380x320 mm, is a printed display base in a larger format with the relief of a modern airfield apron with NATO markings.
In stock
27.96 €
MiniartMA530071:35

1:35 Raupenschlepper Ost RSO/01 - Last Production

The plastic kit MiniArt Raupenschlepper Ost RSO/01 (last production, 1:35) : the German tracked tractor of the Eastern Front of the Second World War.
In stock
37.16 €
MiniartMA354661:35

1:35 Standard N Industrial Tractor. Mod.1940/42

Standard N Industrial Tractor. Mod.1940/42 is an injection-molded plastic model of an industrial tractor of the Second World War period in 1:35 scale from MiniArt. The model is supplied unassembled and unpainted.
In stock
28.76 €
Firma4949A108/481:48

1:48 MAT 49 Submachine Gun with Folded Magazine

The printed modeling accessory MAT 49 submachine gun with the magazine folded in 1:48 scale from the Czech maker Firma49. A faithful reduction of the French submachine gun for the armament of figures and dioramas — it is not a model.
In stock
5.56 €
Kovozávody ProstějovKPEX0491:72

1:72 IL-10 3D parts for Fly kit

Kovozavody Prostejov (KP) 1:72 Il-10 - 3D-printed parts is an accessory set of detail parts for the kit of the Soviet Il-10 ground-attack aircraft in 1:72 scale from FLY. It is not a kit but a set of parts for raising the detail of the model.
In stock
8.76 €
FineMoldsMR041:35

1:35 IJA Medium Tank Type 1 Chi-He

A plastic kit of the Japanese Type 1 Chi-He medium tank (IJA) in 1:35 scale from FineMolds.
In stock
36.76 €
Firma4949T079/721:72

1:72 Kübelwagen Covered Windscreen

Kubelwagen covered windshield (1:72) from Firma49 is a 3D-printed modeling accessory: the folded windshield of the German Kubelwagen light car covered with a tarpaulin. It is not a model but a part to glue on.
In stock
5.16 €
MiniartMA354371:35

1:35 Australian Stuart Mk. I

Australian Stuart Mk.I is an injection-molded plastic kit of the American light tank in Australian service, 1:35 scale, made by MiniArt . The package holds photo-etch, clear parts, link-and-length plastic tracks and decals for three marking options.
In stock
40.76 €
Amusing HobbyAH35A0661:35

1:35 EMBT - Enhanced Main Battle Tank

Amusing Hobby 1:35 EMBT is a plastic kit of the French-German next-generation tank demonstrator with workable tracks and 3D-printed parts.
In stock
54.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.