29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

Tools

2 265 products
Product filtering
up to €
Border ModelBD0009KJ

Precision Speciall Scissors

Precision modeling scissors with fine blades, sold under the designation Precision Special Scissors. For precise cuts of decals, masking tape and thin films.
In stock
24.76 €
Border ModelBD0009K

Precision Speciall Scissors

Modeling scissors for precise work with thin materials. They belong to the modeling tools for a build.
In stock
24.76 €
Border ModelBD0007-3

3mm Cemented Carbide Engraver

A 3 mm sintered carbide scriber from Border Model — the widest edge in the line for pronounced panel lines, wide grooves and work on models in large scales.
In stock
10.36 €
Border ModelBD0007-2

2mm Cemented Carbide Engraver

A 2 mm sintered carbide scriber from Border Model — a versatile width of carbide edge for scribing panel lines and surface detail on plastic models.
In stock
10.36 €
Border ModelBD0007-1,5

1,5mm Cemented Carbide Engraver

The 1.5 mm cemented carbide engraver from Border Model: a precision tool for engraving and restoring panel lines on plastic models, with a carbide tip that keeps its edge far longer than steel.
In stock
10.36 €
Master ToolsMT09979

High Quality scraper - Upgrade/Single Curved Blade

Master Tools modeling scraper with a curved blade — a precise tool for removing mold seams and traces of the mold without sanding. The upgraded variant with one curved blade.
In stock
12.76 €
Master ToolsMT09989

Flat Nose Pliers

Flat nose pliers for modeling work. The straight jaws without a point suit bending photo-etched parts, straightening wire and holding small parts.
In stock
17.16 €
AK interactiveAK8207

MODELING STIRRING BARS

Modeling Stirring Bars from AK interactive are stirring bars for mixing paints, pastes and weathering products in the bottle.
In stock
5.16 €
Master ToolsMT09986

Precision Hobby Pin Vise Set (0.3-1.2mm)

The Precision Hobby Pin Vise Set 0.3 to 1.2 mm is a hand chuck from Master Tools for drilling small holes precisely in plastic, resin and photo-etched parts, and that without electric power.
In stock
16.76 €
RevellRE39080

Panel Line Engraver

The Revell Panel Line Engraver is a modeling tool for engraving and restoring engraved panel lines on plastic models.
In stock
12.76 €
JH modelsJHBR9

Tvarová brousítka Sada A1 – A5 / 9 mm

JH models shaped sanding sticks, set A1 to A5, width 9 mm is an assembly of five shaped sanding sticks in a wider version for work on larger surfaces.
In stock
23.16 €
JH modelsJHBR7

Tvarová brousítka Sada A1 – A5 / 7 mm

JH models shaped sanding sticks, set A1 to A5, width 7 mm is an assembly of five shaped sanding sticks for sanding in the less accessible places of a model.
In stock
22.36 €
Fluorescent Orange Finish-25 %Stock ClearanceFavorite
HasegawaHATF6

Fluorescent Orange Finish

A modeling item in a fluorescent orange shade, that is in a signal color for warning and highly visible surfaces.
3 left
13.16 €9.88 € You save 3.28 €
HaulerHQT009

stainless saw for scalpel holder nr.4 (big)

A stainless modeling saw for the No. 4 scalpel handle from the maker Hauler is a tool for the precise separation of plastic, resin and metal parts with a minimal width of cut.
In stock
8.40 €
TamiyaTA741501:12

Modeling Template (Round, 1-12.5mm)

Modeling Template (Round, 1-12.5mm) is a stainless steel template with a row of circular holes for scribing and cutting accurate circles.
In stock
7.16 €
TamiyaTA87200

Fine Lapping Film #8000 (3pcs.)

Tamiya Fine Lapping Film 8000 grit (3 pcs) is a fine abrasive film for polishing plastic and metal surfaces to a high gloss. Suitable for wet sanding.
In stock
5.96 €
Fine ArtFA-557

Model clamps # 2 9,0cm 3pcs

Fine Art modeling clamps, 9.0 cm long, three pieces in the package – sprung clamps that hold glued parts until the glue has dried.
In stock
3.56 €
Fine ArtFA-556

Model clamps # 1 6.5 cm 4 pcs

Fine Art model clamps (4 pcs, 6.5 cm) hold glued parts together until the glue has dried. A practical aid for building models.
In stock
2.76 €
U-STARUA90127

Pressure Plate for Sculpture

A pressure plate for working with modeling paste. It is a tool for repeated use, not a material and not a ready-made effect.
In stock
7.96 €
U-STARUA90126

Mud Sculpture Pressure

A modeling tool for working with moldable pastes. How it is used follows the manufacturer's instructions.
In stock
7.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.