DSPIAE DB-03 is a set of ten carbide drill bits in the range from 0.3 to 1.2 mm. The shank has a uniform diameter, so the bits fit a chuck as well as a pin vise.
DSPIAE PMT-H05 is precut masking tape with hexagons five millimeters in size. The middle size in the range, usable on most surfaces of ordinary models.
DSPIAE PMT-H07 is precut masking tape with hexagons seven millimeters in size. A pattern for medium and larger surfaces, where the honeycomb is meant to stay clearly readable.
DSPIAE PMT-H09 is precut masking tape with hexagons nine millimeters in size. The largest size in the range, intended for large scales and robot figures.
DSPIAE PMT-DC is precut masking tape with a digital camouflage pattern. The angular fields are cut out at the factory; all you do is peel them off and stick them on.
DSPIAE PMT-SP is precut masking tape with a squiggle pattern. The individual pieces are peeled off and stuck onto the model, so a wavy camouflage comes about without any freehand cutting.
DSPIAE AT-ECA is an acrylic mat with arcs engraved into it. It makes it possible to cut accurate squiggles and soft camouflage transitions out of masking tape.
DSPIAE AT-ECB is an acrylic mat with polygons engraved into it. It serves for cutting angular masking shapes, typically for splinter camouflage patterns.
The DSPIAE PC-03GY is three gray polystyrene sheets 0.3 mm thick with a printed grid. The thinnest option in the range, for skinning, fillers and cladding.
The DSPIAE PC-05GY is three gray polystyrene sheets half a millimeter thick with a printed grid. A universal material for add-on plates, fillers and scratch-built parts.
The DSPIAE PC-10GY is three gray polystyrene sheets one millimeter thick with a printed millimeter grid. Material for building your own parts, armor plates and bulkheads.
DSPIAE BB-0.5 is a set of eight brass bars half a millimeter in diameter. The finest size in the range, intended for aerials, lightning conductors, rigging and small pins.
DSPIAE BB-1.5 is a set of six brass bars one and a half millimeters in diameter. A size for the pins of medium parts, gun barrels and small reinforcements.
DSPIAE BB-3.0 is a set of five brass bars three millimeters in diameter. They serve as a load-bearing axle, a pin or an internal reinforcement where plastic alone would not hold the weight of a part.
With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:
Always active
Necessary cookies
These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.
Analytical cookies
They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.
Marketing cookies
They collect information to better tailor advertising to your interests, both on and off this website.
To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.
